JB and the Moonshine Band Merch Case

Here are some custom merchandise cases we built for JB and the Moonshine Band. One is a 50 compartment clam shell that is 4′h x 5′w x 2′d when closed. The drawer case is 4′h x 5′w x 18″ d with 16 drawers

[Show as slideshow]

Anchored Merch Case

Case is 5′ long 30″ tall and 24″ deep, optional drawers in top and table legs in lid.

[Show as slideshow]

80 Proof Case

This case is 4′ tall X 5′ long X 18″ deep  and has 16 10″X12″ compartments, 5 10″X10″ compartments, 2 8″X10″ compartments, and 3 10″X10″ drawers. Includes locking casters. This is largest merch case we offer in this style.

[Show as slideshow]

Cory Morrow Merch Case

Custom case designed for Cory Morrow. Has compartments for manikins and extra shirts along with a tray for CD’s. Also has 2 drawers on the back side. Also shown is standard merch case with removable front. 

[Show as slideshow]

Dr. Performance Case

Clam shell style case available in several different sizes, this case is the ultimate merch case. It can either be folded out strait or at 90* to form a corner. The Case pictured is 5″ long by 3″ tall by 2′ wide when closed. It has 30, 12″ compartments.

[Show as slideshow]

Economy Merch Case

This smaller merch case will hold over 300 shirts (if rolled), 250 CD’s, and 50 coozies. This case is ideal for the band that is just starting out or as an additional case for a fairly low cost. This case is 24″ wide X 24″ deep X 36″ tall not including caster height.

[Show as slideshow]

Johnny Cooper Merch Case

Full display for Johnny Cooper. These cases have removable fronts that can be made into tables.

[Show as slideshow]

Mo Robson Merch Case

Merch case with removable CD case and six deep sections for shirts and one smaller section for koozies.

[Show as slideshow]

Rich O’Toole Merch Case

This case features a hinged lid with four deep partitions.

[Show as slideshow]

Roger Creager Merch Case

Merch case for Roger Creager with removable lids. This style case allows the merchandise to be accessed from the top.

[Show as slideshow]

Stephen Pointer Merch Case

Removable front lid with 9 12″X12″ spaces and 3 drawers. This case is 4′ X 3′ X 18″ also available in the 5′ X 3′ X 18″. Also available with folding table legs in the lid and locking casters.

[Show as slideshow]

Alligator Skinned Fiddle Case

Custom made fiddle case with Alligator Skin.

[Show as slideshow]

Amp Head Case

Standard style amp case.

[Show as slideshow]

Amp Head Rackmount Combo Case

Front and back removable lids, two drawrs and shelf.

[Show as slideshow]

Amp Head Case

Optional hinged lid or large removable lid, optional wheels and retractable handle available. 1″ or 2″ foam.

[Show as slideshow]

Double Sub Case

Case made to fit 2 sub cabinets.

[Show as slideshow]

Bass Cab Rackmount Case

Bass speaker/rackable amp combo with removable front and back. Case is available with or without drawers and in any number of rack spaces.

[Show as slideshow]

Bass Cab

Case is offer with front removable lid and small access door in back or with front and back removable lids.

[Show as slideshow]

Equipment Cases

Case is offered in any size with any number of drawers in any configuration. This case is 36″X36″X24″. This Case features our basic drawer package, we also offer a more attractive drawer that is trimmed with aluminum and a recessed handle to match the exterior of the case.

[Show as slideshow]

Guitar Flight Case

This ATA flight case is made of 1/4″ composite material and machine riveted. It is form fitted for specific bodies and has a complete velour interior.

[Show as slideshow]

Microphone Case

Small mike case that holds 9 mikes and cables.

[Show as slideshow]

Head & Cab Combo Case

Case features front and back removable doors, 1″ or 2″ foam, also available with rack space.

[Show as slideshow]

Mixer Station Case

Case includes sloped rack space on top for mixer/soundboard, vertical rack space, space to right of mixer for laptop, and drawers for additional equipment (mikes, cables ect…). Top and front removable with small access door in rear, optional table legs in front lid.

[Show as slideshow]

Pedal Board Case

Pedal board case with removable slanted board.

[Show as slideshow]

Steel Guitar Case

ATA steel guitar case with velour interior.

[Show as slideshow]

Mixer Rack Combo Case

This design has a removable front and top with a large access door in the back for the rack equipment. Optional amount of rack space. Optional locking casters.

[Show as slideshow]

Mixer Soundboard Case

Heavy duty mixer case with optional legs, 1″ – 2″ foam for extra protection.

[Show as slideshow]

Multiple Head Case

Cases hold 2-3 ampheads with rack space and drawers.

[Show as slideshow]

Soundboard Equipment Case

Front and top removable lids, soundboard on top with optional Rack space and small door in back for chords.

[Show as slideshow]

Rack Mount

Large Rack mount with removable front and back. Shown with optional drawers.

[Show as slideshow]

AR 15 Case

Custom made case for an AR15 Rifle.

[Show as slideshow]

Red Footlocker Case

Custom made red footlocker case.

[Show as slideshow]

Pink Footlocker Case

Custom made pink footlocker case with carpeted interior.

[Show as slideshow]

Computer Work Station

This case offers a shock mounted foamed compartment for a moniter, a keyboard drawer, a shelf for small equipment (ex. router), and rack rails for rackable equipment.

[Show as slideshow]

Flat Screen TV Case

This Case offers a foamed compartment for a flat screen TV and a compartment for the TV stands, also available with just the foamed TV compartment.

[Show as slideshow]

Foamed PA Speaker

PA speaker case with formed foam interior

[Show as slideshow]

Oil Field Cases

Cases made for core samples for the Oil Field

[Show as slideshow]

Printer Work Station

Custom designed workstation.

[Show as slideshow]

Large Drum Case

Large drum case with removable lid, holds bass drum, 2 snares, 2 rack toms, 1 floor tom, and cymbals.

[Show as slideshow]

Drum Case with Tray

Medium size drum case with removable tray. Holds bass drum, snare, rack tom, floor tom, in the bottom with cymbals and hardware in the tray.

[Show as slideshow]

Drum Case with Removable Front

Medium size drum case with removable lid. Holds bass drum, snare drum, rack tom and floor tom, and cymbals. With optional hardware case.

[Show as slideshow]

Basic Trainer Cases

This is our standard trainer case with a hinged lid, and can be made with trays and compartments.

[Show as slideshow]

Clamshell Case

This is a clamshell case with drawers and peg racks. This can be constructed any way you would like.

[Show as slideshow]

Hinged Front Trainer Case

This case features a hinged front door which has shelves for holding spray cans. Includes dowel rods for tape in the top drawer and empty drawer on bottom. Also include 6 plastic trays and heavy-duty semi pneumatic tires that handle curbs and grass very well. This case was custom designed by a trainer to fit their needs so feel free to change any aspect of the case to fit your needs. We are a custom case manufacture and we want to build a case that is perfect for you.

[Show as slideshow]

Top and Front Entry with Table in Lid

Trainer case with front and top removable lid,  the front lid has folding legs to make a sturdy table.Top compartment available with partitions and or pegs. Bottom available with plastic drawers.

[Show as slideshow]